|
Title: dash Post by: Jeff s on Sunday, 13 May, 2012, 04:08:13 PM just wondering what people do for there dash board underneath do u leave it open for easy access to get to fuses and so on or do close it off ..? im afraid that im going to hop into the car and rip the wires out with my feet with the wire below the dash Ive cable tied them together and tucked away as much as possible i was thinking something like a kick board
Title: Re: dash Post by: The Metalsmith on Sunday, 13 May, 2012, 11:22:29 PM Hi Jeff,
I've been thinking about your reek's issues. Most of your wiring problems come from where the fuse box is placed. Un-screw it and tuck it over the inside of your centre console panel. This should stop you from taking it out when your jumping in. Simon Title: Re: dash Post by: Morris on Monday, 14 May, 2012, 12:05:32 AM G Day Jeff
I used a sheet of plastic cardboard , the stuff that a lot od For Sale signs are made from to make a panel that clips out easily. A clamp on the steering column holds up the front end and the rear end sits on the rolled lip at the bottom of the dash face. Good Luck Morris. Title: Re: dash Post by: Jeff s on Monday, 14 May, 2012, 10:51:56 AM i wonder if i can move it up higher under the dash and i think its time to go on a midnight prowl for a for sale sign too thats a good idea :P oh and simon the break lights are stuck on now i duno why.. even when u push the breaks doesnt make a diffrence
Title: Re: dash Post by: The Metalsmith on Monday, 14 May, 2012, 11:13:57 PM Time for daddy to visit again mate...
Simon Title: Re: dash Post by: Jeff s on Tuesday, 15 May, 2012, 06:34:57 AM hehe its no biggie atm but yes u are the father to my electrics cause me dont touch electrics have enuff problems screwing in a light bulb without getting zapped.. buts another story
Title: Re: dash Post by: midmount on Tuesday, 15 May, 2012, 10:52:28 AM Hi jeff. some bugs had dual brake light switchs.If only one is used, the other wires some times touch together
bringing on the lights. midmount Title: Re: dash Post by: CyCo on Tuesday, 15 May, 2012, 03:02:51 PM Don't quote me on it, but from memory, if the brake light switch was on when it died (ie, when you hit the brakes), the brake lights will remain on.
|